Customization: | Available |
---|---|
Type: | Supercapacitor |
Application: | General Purpose, AC / Motor, Power, Lighting, Air Conditioner, Fan, UPS |
Still deciding? Get samples of US$ 0.26/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Part Number | Rated voltage/ V | Rated capacity/F | ESR (1KHz)/Ω | Leakage current (24h)/mA | Φ/ mm | H/ mm | P/ mm |
HESC5R5104Z-V(Z009) | 5.5 | 0.10 | ≤65 | ≤0.005 | 9.5 | 14.1 | 4.5 |
HESC5R5224Z-V(Z009) | 5.5 | 0.22 | ≤65 | ≤0.005 | 9.5 | 14.1 | 4.5 |
HESC5R5224Z-V(Z011) | 5.5 | 0.22 | ≤50 | ≤0.005 | 11.5 | 16.5 | 4.5 |
HESC5R5334Z-V(Z009) | 5.5 | 0.33 | ≤65 | ≤0.005 | 9.5 | 14.1 | 4.5 |
HESC5R5334Z-V(Z011) | 5.5 | 0.33 | ≤50 | ≤0.005 | 11.5 | 16.5 | 4.5 |
HESC5R5474Z-V(Z011) | 5.5 | 0.47 | ≤50 | ≤0.005 | 11.5 | 16.5 | 4.5 |
HESC5R5105Z-V | 5.5 | 1.0 | ≤20 | ≤0.02 | 19.0 | 23.0 | 4.5 |
HESC5R5155Z-V | 5.5 | 1.5 | ≤20 | ≤0.02 | 19.0 | 23.0 | 4.5 |
HESC5R5405Z-V | 5.5 | 4 | ≤16 | ≤0.03 | 25.0 | 29.0 | 6.0 |
HESC5R5104Z-H(Z009) | 5.5 | 0.10 | ≤65 | ≤0.005 | 9.5 | 8.6 | 10.0 |
HESC5R5224Z-H(Z009) | 5.5 | 0.22 | ≤65 | ≤0.005 | 9.5 | 8.6 | 10.0 |
HESC5R5224Z-H(Z011) | 5.5 | 0.22 | ≤50 | ≤0.005 | 11.5 | 8.6 | 10.0 |
HESC5R5334Z-H(Z009) | 5.5 | 0.33 | ≤50 | ≤0.005 | 9.5 | 8.6 | 10.0 |
HESC5R5334Z-H(Z011) | 5.5 | 0.33 | ≤50 | ≤0.005 | 11.5 | 8.6 | 10.0 |
HESC5R5474Z-H(Z011) | 5.5 | 0.47 | ≤50 | ≤0.005 | 11.5 | 8.6 | 10.0 |
HESC5R5105Z-H | 5.5 | 1.0 | ≤20 | ≤0.02 | 19.0 | 9.2 | 19.0 |
HESC5R5155Z-H | 5.5 | 1.5 | ≤20 | ≤0.02 | 19.0 | 9.2 | 19.0 |
HESC5R5405Z-H | 5.5 | 4.0 | ≤16 | ≤0.03 | 25.0 | 9.0 | 25.0 |
HESC5R5104Z-C | 5.5 | 0.10 | ≤50 | ≤0.005 | 13.0 | 13.0 | 5.0 |
HESC5R5224Z-C | 5.5 | 0.22 | ≤50 | ≤0.005 | 13.0 | 13.0 | 5.0 |
HESC5R5334Z-C | 5.5 | 0.33 | ≤50 | ≤0.005 | 13.0 | 13.0 | 5.0 |
HESC5R5474Z-C | 5.5 | 0.47 | ≤50 | ≤0.005 | 13.0 | 13.0 | 5.0 |
HESC5R5105Z-C | 5.5 | 1.0 | ≤20 | ≤0.02 | 20.5 | 12.5 | 5.0 |
HESC5R5155Z-C | 5.5 | 1.5 | ≤20 | ≤0.02 | 20.5 | 12.5 | 5.0 |
Supercapacitor Application Guide
1. Charge Methods
EDLC can be charged using various methods including constant current, constant power, constant voltage or by paralleling to an energy source, i.e. battery, fuel cell, DC converter, etc. lf an EDLC is configured in parallel with a battery, adding a low value resistor in series will increase the life of the battery. lf a series resistor is used, ensure that the voltage outputs of the EDLC are connected directly to the application and not through the resistor; otherwise the low ESR of the EDLC will be nullified. Many battery systems exhibit decreased life time when exposed to high current discharge pulses.
2. Soldering Information
Excessive heat may cause deterioration of the electrical characteristics of the EDLC, electrolyte leakage or an
increase in internal pressure. Follow the specific instructions listed as below:
1) Do not dip EDLC body into melted solder.
2) Only flux the leads of the EDLC.
3) Ensure that there is no direct contact between the sleeve of the EDLC and the PC board or any other component.
4) Avoid exposed circuit board runs under the EDLC to prevent electrical shorts.
3. Long Term Storage
1) Do not store EDLC in any of the following environments:
2) High temperature and/or high humidity
3) Direct contact with water, salt water, oil or other chemicals
4) Direct contact with corrosive materials, acids, alkalis or toxic gases
5) Direct exposure to sunlight
6) Dusty environment
7) Environment subject to excessive shock and/or vibration